Produkty dla a dodatki (208)

Die äußerst flexible Füll- und Verschließlinie "Flex-O-Line" kann dutzende Formate verarbeiten und fällt durch geringe Formatumstellungszeiten auf. Das Überzeugende an der Flex-O-Line ist die Möglichkeit der äußerst raschen Umrüstung auf die unterschiedlichsten Formate. Unsere Servotechnik, bestehend aus dem Pucktransport und unseren AL 101Eex. Maschinen, kann durch verschiedene Module ergänzt werden. Zum Beispiel durch die GSM 500CR/VS, um Dispenser aufzusetzen und zu crimpen, Kappen oder Überkappen aufzusetzen und zu verschrauben, und die  GSM PVS, um Dispenser für Sprühflaschen aufzusetzen und zu verschrauben. Dabei können Volumina zwischen 5 bis 1000 ml bedient werden. Da das Marketing in der Kosmetikbranche sehr schnelllebig ist und die Verpackungsindustrie deshalb besonders flexibel reagieren muss, kann in die Linie zur manuellen Montage direkt manuell eingegriffen werden. So können schnell Ergebnisse geliefert werden.

Förder-/Transportbänder aus PVC, PU, PE, PTFE, PE-Gaze; Voltabänder, silikonbeschichtet, Vakuumbänder, Filzbänder, auch für Landwirtschaft (Silage-u. Kartoffelbänder) Fragebogen in der Homepage

Scharnierplattenbänder

Innenausstattung, Klappensysteme. Teile für Nasszellen.

Scharmann has developed the ECOSPEED F for highspeed machining of mediumsized aluminium structural components. The horizontal spindle arrangement, the vertical pallet arrangement and the Sprint Z3 parallel kinematic machining head, which delivers high travel speeds (50 m/min) and accelerations (9.81 m/s²), all come from the successful ECOSPEED. What sets the F version apart from the standard ECOSPEED is that the machine column is stationary. The pallet travels in the X direction on the vertically arranged table group. The ECOSPEED F is equipped with a rotating double pallet station, located parallel to the Xaxis, which enables component loading and unloading during the machining cycle Length (X-axis):mm 3,500 Width (Y-axis):mm 2,000 Payload:kg 3,000 X-axis:mm 3,800 Y-axis:mm 2,500 Z-axis (spindle horizontal pos.):mm 670 Z-axis (spindle +/- 45°):mm 370 A/B-axis, conical work envelope:° A/B-axis, conical work envelope Bt-axis (table):sec 184 Pallet changing time (definend cycle):sec 13 Chip to chip time (definend cycle):m/s2 9.81 Acceleration / deceleration in X-axis:m/s2 9.81 Acceleration / deceleration in Y-axis:m/s2 9.81 Acceleration / deceleration in Z-axis:°/s2 685 Acceleration / deceleration in A- and B-axis:m/min max. 50 Rapid traverse / feed in X-axis:m/min max. 50 Rapid traverse / feed in Y-axis:m/min max. 50 Rapid traverse / feed in Z-axis:m/min max. 50 Rapid traverse / feed in Bt-axis:rpm 20 Tool magazine:WERO rack type 129 / 300 pockets C-axis:° 360 continuous

Gauges / Thermometers and Accessories - Industrial thermometers

Stabile Dreibäume für den mobilen Einsatz in Verbindung mit einem Höhensicherungsgerät und Rettungshubeinrichtung. • Tragkraft für max. 2 Personen Optional mit • handbetriebener Lastwinde für Lasten bis 300 kg und max. 20 m Seillänge • Schnellwechselhalterungen für Lastwinde und Höhensicherungsgerät • Trage- und Schutztasche Diese Dreibäume sind nur in Verbindung mit einem Rettungs- und Bergungssystem z.B. ROLLGLISS zum Einfahren zugelassen.

• 1200 Layer GFK-Struktur • Schiebefenster seitlich, getönt, verschließbar • Schiebefenster zur Fahrgastkabine, verschließbar • Rahmenlose Heckscheibe, getönt, abschließbar • Zentralverriegelung der Heckscheibe - Anbindung an Fahrzeugzentralverriegelung • Sicherheitsverglasung • Heckspoiler mit integriertem 3.LED Bremslicht • Schienendachreling, belastbar bis 80kg • Vinylledervollverkleidung im Innenraum • LED Innenraumbeleuchtung • Aufbauanleitung in deutsch mit Bebilderung und Pflegehinweisen • TÜV Zertifikat • 2 Jahre Herstellergarantie auf alle Bauteile, ausgenommen Verschleißteile

Bedruckte Krawatten völlig individuell in Deutschland produziert. Neben der Herrenkrawatte, fertigen wir auch Damenkrawatten und Serviceschleifen. Firmenkrawatten individuell gefertigt. Im passenden Corporate Design bestimmen unsere Kunden das Design und die Farben. Krawatten mit einer üblichen Länge von ca. 153 cm und einer Breite von ca. 9 cm,. Ergänzend bieten wir auch Damenkrawatten in einer Breite von ca. 7 cm an. Hergestellt in: Deutschland

je ein Engel aus der Serie "Uhlig Engel" bunt mit roten Flügeln 225/043/.../R mit Trommel 01, Triangel 09, Kesselpauken 19, Becken 21 und Bauchtrommel 31, Höhe Engel 60 mm, Original erzgebirgische Handarbeit Hersteller: Kunstgewerbe Frieder & André Uhlig

Wechselrichter & Zubehör - Photovoltaik

The crucible or boat, holding the evaporation material, is literally at the core of the evaporation process. Several different materials and shapes are available to cover your individual needs. While the choice of the crucible can be critical for non-standard applications, a conical Al2O3 crucible will do in most cases. If you are not sure about the requirements of your particular application, please do not hesitate to contact us. Our experienced technical staff will guide you through your options to find the crucible that will yield the best results for your individual application.

Einsatzkörbe für unterschiedliche Einsatzzwecke

Reasonable and safe breath bags for sampling, fitting the 13C breath test analyzers. Stand–up breath bag with cap, 0.3l

gelochtes Transportband

Geschweißte und geschraubte Fachwerk-Rahmenkonstruktion Sehr großzügige Wartungsöffnungen, Kette durchgehend zugängig

High performance simultaneous 5 axis mill turn center The STC series has been designed to provide unrivalled economy in the machining of the most demanding structural parts, multiblades and casings with long cycle times, and provide the customer with a whole host of practical options. These machining centers have excellent static and dynamic properties as well as a tried and tested rotatable head, making them the benchmark for heavy chip removal in titanium and Inconel part for the aerospace and power generation industries. Pallet clamping surface according to DIN 55201:mm 1250x1800 (1600x1800) Max. workpiece weight:kg 12000 Column linear travel X:mm 3400 Main spindle vertical travel Y:mm 1900 Table traverse travel Z:mm 2450 Swing diameter:mm 2800 A-axis:degree -100/+60 B-axis:degree endless X/Y/Z:m/min 45 A-axis:rpm 6(12) B-axis:rpm 5.5 Motor spindle , max. Speed:rpm 8000 Max. power (100% ED):kW/Nm 37/940 Total taper:SK 50 (HSK-A100) Motor spindle 1, max. Speed:rpm 15000 Max. power at 100% duty cycle:kW/Nm 70/230 Total taper:HSK-A100 Motor spindle 2, max. Speed:rpm 24000 Max. power at 100% duty cycle:kW/Nm 70/60 Total taper:HSK-A63 Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 67 Space requirement for basic machine LxWxH:mm 15900x10500x5450

The STC series has been designed to provide unrivalled economy in the machining of the most demanding structural parts, multiblades and casings with long cycle times, and provide the customer with a whole host of practical options. These machining centers have excellent static and dynamic properties as well as a tried and tested rotatable head, making them the benchmark for heavy chip removal in titanium and Inconel part for the aerospace and power generation industries. Pallet clamping surface according to DIN 55201:mm 800x800 (800x1000 / 1000x1000) Max. workpiece weight:kg 3000 Column linear travel X:mm 1700 Main spindle vertical travel Y:mm 1600 (1900) Table traverse travel Z:mm 1950 Swing diameter:mm 2000 A-axis:degree -100/+60 B-axis:degree endless X/Y/Z:m/min 45 A-axis:rpm 6(12) B-axis:rpm 5.5 (10) Motor spindle , max. Speed:rpm 8000 Max. power (100% ED):kW/Nm 37/940 Total taper:SK 50 (HSK-A100) Motor spindle 1, max. Speed:rpm 15000 Max. power at 100% duty cycle:kW/Nm 70/230 Total taper:HSK-A100 Motor spindle 2, max. Speed:rpm 24000 Max. power at 100% duty cycle:kW/Nm 70/60 Total taper:HSK-A63 Positioning uncertainty (P):sec 0,005 / 6 Positioning scatter (Ps):sec 0,0028 / 4 Reversal error (U):sec 0,002 / 3 Weight:t 42 Space requirement for basic machine LxWxH:mm 9500x7800x4550

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VCV provides the ultimate flexibility for machining large components. In addition to the «on center» machining capability of a standard lathe the VCV machines are able to machine eccentric features. With the use of our extensive range of standard milling and drilling attachments, the VCV machine range is capable of full 5 sided machining of components up to 12,000 mm in diameter and 350 tons in weight. On machines with a Yaxis the component can be machined in any position. The turning table is set on a sliding bed. The default Yaxis travel corresponds to the swing diameter of the machine size, but can be tailored to suit any application. Swing diameter:mm 12,000 Table diameter:mm 9,000 / 10,000 Y-axis:mm +/- 6,000 Working height max:mm 10,000 Main drive S1:kW 2x 60 - 2x 150

Fewer rejects thanks to high concentricity and axial runout accuracies (< 2 μm) Wide manufacturing range thanks to precise and powerful table drive (torque motorIncreased productivity through complete machining in just one setup Swing diameter:mm 900 Grinding diameter:mm 800 Height under grinding wheel thickness 100 mm:mm 600 Standard table diameter:mm 800 Table speed:rpm 150 Table load:kg 2,000 Carriages:1 Grinding ram stroke:mm 800 Feed force:kN 10 X- and Y-axis speed max.:mm/min 10,000 Spindle-holder tilt:degree - 5° + 275° Tilt lead:degree 1° (Hirth) Power (conv. GW) (S1):kW 7 à 25 Speed (conv. GW):rpm 6,000 à 12,000 Power (CBN wheels) (S1):kW 15 / 25 Speed (CBN wheels):rpm 8,000 / 18,000 GW diameter (conv. or CBN) max.:mm 150 / 300 Wheel thickness max.:mm 50 / 100 Wheel-holder clamping taper face:x Surface grinding spindle (conv. GW) (S1):kW 25 Spindle speed:rpm 5,000 Wheel diameter max.:mm 400 Electropermanent magnetic chuck No. of poles / slots width:mm 24 / 10H10

Scharmann has developed the ECOSPEED F for highspeed machining of mediumsized aluminium structural components. The horizontal spindle arrangement, the vertical pallet arrangement and the Sprint Z3 parallel kinematic machining head, which delivers high travel speeds (50 m/min) and accelerations (9.81 m/s²), all come from the successful ECOSPEED. What sets the F version apart from the standard ECOSPEED is that the machine column is stationary. The pallet travels in the X direction on the vertically arranged table group. The ECOSPEED F is equipped with a rotating double pallet station, located parallel to the Xaxis, which enables component loading and unloading during the machining cycle Length (X-axis):mm 8,000 Width (Y-axis):mm 2,000 / 2,500 Payload:kg 6,000 X-axis:mm 8,300 Y-axis:mm 2,500 / 3,000 Z-axis (spindle horizontal pos.):mm 670 Z-axis (spindle +/- 45°):mm 370 A/B-axis, conical work envelope:° +/- 45 Pallet changing time (definend cycle):sec 225 Chip to chip time (definend cycle):sec 13 Acceleration / deceleration in X-axis:m/s2 5.30 / 4.30 Acceleration / deceleration in Y-axis:m/s2 9.81 Acceleration / deceleration in Z-axis:°/s2 685 Acceleration / deceleration in A- and B-axis:m/min max. 50 Rapid traverse / feed in X-axis:m/min max. 50 Rapid traverse / feed in Y-axis:m/min max. 50 Rapid traverse / feed in Z-axis:m/min max. 50 Rapid traverse / feed in Bt-axis:rpm 20 Tool magazine:WERO rack type 129 / 300 pockets C-axis:° 360 continuous

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VCV provides the ultimate flexibility for machining large components. In addition to the «on center» machining capability of a standard lathe the VCV machines are able to machine eccentric features. With the use of our extensive range of standard milling and drilling attachments, the VCV machine range is capable of full 5 sided machining of components up to 12,000 mm in diameter and 350 tons in weight. On machines with a Yaxis the component can be machined in any position. The turning table is set on a sliding bed. The default Yaxis travel corresponds to the swing diameter of the machine size, but can be tailored to suit any application. Swing diameter:mm 1,600 Table diameter:mm 1,250 / 1,400 Y-axis:mm +/- 800 Working height max:mm 1,885 Main drive S1:kW 2x 60 - 2x 150

The mediumsized all round machining centers guarantee maximum efficiency, high machining quality and reliability. The Heckert Athletic series are perfect for a wide field of application in all areas of the metalworking industry. X / Y / Z travel mm:1,200 / 950 / 1,200 Rapid traverse m/min:65 Tool holder:HSK-A100 Max. tool length mm:800 Max. tool diameter mm:340 Pallet dimension mm:630 x 630 (630 x 800) Workpiece core contour ø in mm:1,250 Max. workpiece height mm:1,250 Loading mass kg:1,500 Machine length mm:8,100 Machine width mm:4,940

Gauges / Thermometers and Accessories - Differential pressure gauge DM

With the T/TF series, Droop+Rein offers gantry machining centres for heavyduty machining in many sectors Applications range from tool and mould making, aircraft component manufacturing and engine manufacturing to general mechanical engineering. Based on the robust, highly accurate and powerful basic machines, the T/TF series offers an extensive system of innovative automation and expansion stages that enable the machines to be adapted flexibly to each machining task. The optional automatically changing forktype milling head makes complex and demanding machining possible. Through extensive application knowhow, a variety of different milling heads are available including vertical milling heads, angle milling heads, and forktype milling heads for positional or simultaneously controlled applications. Power:kW 50 - 150 Torque:Nm 2,400 - 10,000 Speed:rpm 2,500 - 6,000 Length:mm 3,000 - 10,000 mm + 1,000 mm steps Width:mm 2,000 - 4,500 mm + 500 mm steps X-axis:mm 3,000 - 11,000 mm + 1,000 mm steps Y-axis:mm 3,000 - 6,000 mm + 500 mm steps Z-axis:mm 1,500 - 4,000 mm W-axis:mm 1,000 - 5,000 mm + 500 mm steps (only for T) C-axis:° ± 180/n x 360 X-axis:m/min 30 Y-axis:m/min 30 Z-axis:m/min 20 W-axis:m/min 4 (only for T) C-axis:°/min 3,600

The 5axis Mill / Turn center model s128 is a perfect combination of maximum performance and minimum footprint. On less than 2m², the s128 is a concentrate of high technology; Milling, Turning, Drilling, Engraving, Setting preparation and Diamond cutting processes are possible to produce parts as single unit or as serial manufacturing. The machining of miscellaneous parts from bar or blank and demanding perfect surface quality can be achieved with very short changeover time. Features Compact machine less than 2m² Flexible manufacturing solution Production from bar or blank 5Axis simultaneously Longitudinal Z:mm 150 Transversal X:mm 360 Vertical Y:mm 115 Power:kW 1 Torque:Nm 6 Spindle Speed:2000 min-1 Rotation speed C-axis:°/min 50000 Travel:° +30/-130 Torque max:Nm 122 Power:kW 1 Maximim speed:°/min 36000 Rotation speed:50000 min-1 Power:kW 5,2 Torque:Nm 1,2 Tool-holder type:SKI 20 Type:Pick and place Number of tools:16/24 positions Max. tool diameter:mm 40 Max. tool length:mm 86 Max. tool weight:kg 0,8 Installed power:13 kVA Voltage:400V/ 50Hz Compressed air supply:bar 6 Machine (without any options):kg 1100

With the FOGS NEO series, Droop+Rein has developed a powerful machine concept for complex machining. The range of services covers processes from machining standard geometries and prefinishing contours to final finishing. For dynamic machining with the highest feed rates, the concept caters for the movement and acceleration of constant masses, regardless of workpiece size and weight. Dynamic and flexible With its new, highly flexible and fast Caxis (±400°), the Droop+Rein FOGS NEO highspeed machining centre is ideal for the complete multifunctional machining of very large workpieces. Of course, the series also features automatic pallet or tool change, tool diameter and length measurement and automatic billing of contour deviations. Thanks to a variety of components and peripheral devices from their modular system, Droop+Rein can create an efficient and processoriented overall system that is tailored to the customer. Power:kW 40 Torque:Nm 700 - 1,800 Speed:rpm 4,000 - 6,000 Length:mm 3,000 - 30,000 + 1,000 mm steps Width:mm 2,000 - 6,000 + 500 mm steps X-axis:mm 3,800 - 31,000 + 1,000 mm steps Y-axis:mm 2,500 - 7,000 + 500 mm steps Z-axis:mm 1,500 - 2,500 C-axis:° ± 200/± 400/n x 360 X-axis:m/min 40 Y-axis:m/min 40 Z-axis:m/min 30 C-axis:°/min 4,320

The vertical lathes of the TVU product line of Berthiez are especially suited for machining engine and turbine components, which are primarily used in the aerospace industry as well as for alternative and classical power generation. The TVU vertical lathes are characterized by a complete cast design, highprecision static and dynamic positioning as well as longlasting reliability. Advantages of the TVU vertical turning lathes are, completely cast iron construction, high static and dynamic axis stability, high accuracies and long term reliability. For higher flexibility the machine can be equipped with several pallet change systems and adaptable milling heads. The optional Yaxis table traverse will permit the turning, milling and grinding of complex components in a single clamping. Swing diameter:mm 1,400 Turning diameter:mm 1,250 with standard tool clearance 170mm Machining height fixed crossrail:mm 800-1,130 Machining height moveable crossrail:mm 1,120 / 1,560 Moveable crossrail stroke:mm 800 Step moveable crossrail:mm 100 Table diameter:mm 1,250 Table speed:rpm 630 Table drive power S1 100%:kW 51 / 71 Table torque S1 100%:kW/Nm 10.6 / 13.5 Table load max.:kg 3,500 Cutting force:kN 50 Feed force:kN 15 Ram cross section:mm 250 x 250 Ram stroke:mm 1,000 / 1,250 Rapid traverse max.:mm/min 20,000 Tool interface:CAPTO / HSK / KM Spindle power S1:kW 21 / 36 Spindle speed:rpm 6,000 C-axis feedback intervall:sec 2 Tool interface:CAPTO / HSK / KM / ISO Torque:Nm 200 / 345 Swing diameter:mm 1,000 Twin-pallet Pallet diameter:mm 1,250 Twin-pallet Swing diameter:mm 1,250 Lateral pallet Pallet diameter:mm 1,250 Lateral pallet Swing diameter:mm 1,350 Front pallet Pallet diameter:mm 1,250 Front pallet Swing diameter:mm 1,400 Load on pallet:kg 2,000

Gantry design For machining of largest and heaviest workpieces Droop+Rein offers a floor guided gantry machine line. Best accessibility and utilisation of floor space for largest workpieces combined with highest flexibility in size and configuration. Cross rail, moveable (GS) or fixed (GFS) Economic machining of largest components – flexible, dynamic and precise Floor space savings compared to table moving machines In line with the modular principle – various controls, table configurations, milling head/spindles and tool changer configurations Length:mm 3,000 – 30,000 Width:mm 2,000 – 3,000 X-axis:mm 4,000 – 31,000 Y-axis:mm 3,000 – 4,000 Z-axis:mm 1,500 W-axis:mm 1,250 C-axis:mm ± 400 X-axis:m/min 30 Y-axis:m/min 40 Z-axis:m/min 30 W-axis:m/min 4 C-axis:°/min 4,320 Power S1/S6:kW 40/60 Torque S1/S6:Nm 1,100/1,800 Speed:rpm 4,000-6,000

With the addition of a moveable table, traversing through the twin column portal design of the VC machine range, the VCV provides the ultimate flexibility for machining large components. In addition to the «on center» machining capability of a standard lathe the VCV machines are able to machine eccentric features. With the use of our extensive range of standard milling and drilling attachments, the VCV machine range is capable of full 5 sided machining of components up to 12,000 mm in diameter and 350 tons in weight. On machines with a Yaxis the component can be machined in any position. The turning table is set on a sliding bed. The default Yaxis travel corresponds to the swing diameter of the machine size, but can be tailored to suit any application. Swing diameter:mm 7,000 Table diameter:mm 5,000 / 6,000 Y-axis:mm +/- 3,500 Working height max:mm 6,350 Main drive S1:kW 2x 60 - 2x 150